PDA

View Full Version : Question on sealing an image . . .



tesschap
04-20-2007, 10:37 AM
I'm working on a stamping project - stamping on plastic. I am using Stazon ink but am wondering if I need to seal it when I'm done and if so . . . what do I seal it with?

MidwestStamper
04-20-2007, 12:58 PM
I haven't had alot of experience with stamping on plastic, but I thought that Staz-on was permanent on these kinds of surfaces--so it should be ok as is. Does the Staz-on pad say anything on it about sealing?

loobylou
04-20-2007, 01:05 PM
If you are colouring in you will need to seal the colouring if the surface is going to get wet or "used". the stazon ink is fine left unsealed
Sarah

Vintagegal
04-22-2007, 12:19 AM
I'd use Crystal Glaze or Diamond Glaze. Paint it thinly over the area you've colored in. But, if you're coloring in with Sharpie pen, you won't need to seal it (Sharpie ink is solvent ink, like StazOn, and it's pretty much permanent.)

countrycowgirl
04-22-2007, 09:04 AM
You can also use a sealing spray like Krylon's crystal clear.